ZAHN-5T
High-precision dental milling with dry and wet processing capability, a water-cooled 60,000 RPM spindle and automated tool changing for versatile dental laboratory workflows.
Talk to our Experts
ZAHN-5T Dental Lab Milling Machine
5-Axis Dental Lab Milling Machine
Watch the ZAHN-5T in Action
Manufacturer demonstration footage. Replace with an approved Lodestar-hosted video for production.
Efficient 5-Axis Dental Milling
The ZAHN-5T combines five-axis movement and high-speed spindle performance for dental lab production.
- Five-axis machining for complex dental restoration geometries.
- Manufacturer-stated positioning accuracy of 0.002 mm.
- Supports crowns, copings, bridges, inlays, onlays, veneers and other restorations.
- Servo motor drive and automatic tool change.
Wet and Dry Milling for Dental Laboratories
Adapt workflows to material requirements with a machine designed to support both dry and wet milling.
- Zirconia, PMMA and wax workflows.
- Titanium and lithium disilicate as listed by the manufacturer.
- 98 mm discs, glass ceramics and pre-milled titanium rods.
- Verify material-specific tooling and milling setup before operation.
High-Speed Water-Cooled Spindle
- 2.2 kW spindle power.
- 20,000–60,000 RPM spindle speed range.
- Water-cooling system for spindle temperature management.
- 17 tool positions with automatic tool changes.
Automation and Consistent Workflows
- Automatic tool-changing system supports multi-tool dental milling jobs.
- NC command system and hyperDENT software listed by the manufacturer.
- Includes chiller, water tank and initial milling burs in the standard accessory list.
- Manufacturer-stated zirconia crown milling: approximately 8–15 minutes, subject to geometry and settings.
FAQs
The manufacturer lists titanium, zirconia, PMMA, wax and lithium disilicate. Appropriate tools and machine settings depend on the material.
Yes. Its published specifications list both dry and wet milling modes.
The specified spindle speed range is 20,000–60,000 RPM, with a maximum of 60,000 RPM.
The machine is specified with 17 tool positions and automatic tool changing.
The manufacturer lists one chiller, one water tank, a milling bur set (0.6/1.0/2.0 mm), one wax block and two ceramic/titanium jigs.